74LV4051

General description

The 74LV4051 is a low-voltage CMOS device and is pin and function compatible with the 74HC/HCT4051.

The 74LV4051 is an 8-channel analog multiplexer/demultiplexer with three digital select inputs (S₀ to S₂) an active LOW enable input (E), eight independent inputs/outputs (Y₀ to Y₇) and a common input/output (Z).

With E LOW, one of the eight switches is selected (low impedance ON-state) by S₀ to S₂. With E HIGH, all switches are in the high impedance OFF-state, independent of S₀ to S₂.

V_CC and GND are the supply voltage pins for the digital control inputs (S₀ to S₂and E). The V_CC to GND ranges are 1.0 to 6.0 V. The analog inputs/outputs (Y₀ to Y₇ and Z) can swing between V_CC as a positive limit and V_EE as a negative limit. V_CC - V_EE may not exceed 6.0 V. For operation as a digital multiplexer/demultiplexer, V_EE is connected to GND (typically ground).

Features

• Optimized for low voltage applications: 1.0 to 6.0 V
• Accepts TTL input levels between V_CC = 2.7 V and V_CC = 3.6 V
• Low typ "ON" resistance:
  60 Ohm at V_CC - V EE = 4.5 V
  90 Ohm at V_CC - V_EE = 3.0 V
  145 Ohm at V_CC - V_EE = 2.0 V
• Logic level translation: to enable 3 V logic to communicate with ± 3 V analog signals
• Typical "break before make" built in
• Output capability: non-standard
• I_CC category: MSI

Products/packages

Pricing/ordering/availability

Applications

Related applications
50-60 Hz CRT integrated DTV (TV210D)
Mid-range integrated DTV (TV810)

Block diagrams/pinning

Parametrics/similar products

Similar products
74LV4051 links to the similar products page containing an overview of products that are similar in function or related to the type number(s) as listed on this page. The similar products page includes products from the same catalog tree(s), relevant selection guides and products from the same functional category.

Print / Email

• Print this information
• Email this information

Disclaimer

The information published on product information pages of the www.nxp.com or www.semiconductors.com websites is an extract from product data sheets and is for information purposes only. For detailed information please check the most recent version of the relevant product data sheet as published on these websites. In the event of any conflict between product information pages and data sheets or deviations from information provided in the product data sheets on these product information pages, the information provided in the product data sheets shall prevail.

The product status of the product(s) described in the product data sheet may have changed since publication of the data sheet and therefore information in datasheets on product status may be outdated. The latest information on product status is published on the product information pages of the above-mentioned websites.

As from October 1st, 2006 Philips Semiconductors has a new trade name - NXP Semiconductors, which will be used in future data sheets together with new contact details. In data sheets where the previous Philips references remain, please use the new links as shown below.

http://www.philips.semiconductors.com use http://www.nxp.com

http://www.semiconductors.philips.com use http://www.nxp.com (Internet)

sales.addresses@www.semiconductors.philips.com use salesaddresses@nxp.com (e-mail)

The copyright notice at the bottom of each page (or elsewhere in the document, depending on the version)
- © Koninklijke Philips Electronics N.V. (year). All rights reserved -
is replaced with:
- © NXP B.V. (year). All rights reserved.-

If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or phone (details via salesaddresses@nxp.com). Thank you for your cooperation and understanding.