Select site:
- English
NE/SA/AU5232
General description
The NE/SA/AU5232 is a matched, low voltage, high performance dual operational amplifier. Among its unique input and output characteristics is the capability for both input and output rail-to-rail operation, particularly critical in low voltage applications. The output swings to less than 50 mV of both rails across the entire power supply range. The NE/SA/AU5232 is capable of delivering 5.5 V peak-to-peak across a 600 Ohm load and will typically draw only 700 uA per amplifier. The bandwidth is 2.5 MHz and the 1 pct settling time is 1.4 us.
Features
- Wide common-mode input voltage range: 250 mV beyond both rails
- Output swing within 50 mV of both rails
- Functionality to 1.8 V typical
- Low current consumption: 700 uA per amplifier
- +-15 mA output current capability
- Unity gain bandwidth: 2.5 MHz
- Slew rate: 0.8 V/us
- Low noise: 33 nV/√Hz
- Electrostatic discharge protection
- Short-circuit protection
- Output inversion prevention
Products/packages
| Type number | North American Type number | Ordering code (12NC) | Product status | Package | Packing | Marking | Chemical content | Leadfree conversion date |
|---|---|---|---|---|---|---|---|---|
| NE5232D/01 | NE5232D/01 | 9352 752 51112 | Volume production | SOT96-1
(SO8) | Tube | Standard Marking | NE5232D/01
| Always Pb-free |
| NE5232D/01 | NE5232D/01-T | 9352 752 51118 | Volume production | SOT96-1
(SO8) | Tape reel smd | Standard Marking | NE5232D/01
| Always Pb-free |
| NE5232N/01 | NE5232N/01 | 9352 752 52112 | Volume production | SOT97-1
(DIP8) | Tube | Standard Marking | NE5232N/01
| Always Pb-free |
Pricing/ordering/availability
| Type number | Ordering code(12NC) | Indicative price/unit($) | Region | Distributor | In stock | Inventory date | Buy online | Samples |
|---|---|---|---|---|---|---|---|---|
| NE5232D/01 | 9352 752 51112 | 1.1100 | Order samples | |||||
| NE5232D/01 | 9352 752 51118 | 1.1100 | not available | |||||
| NE5232N/01 | 9352 752 52112 | 1.2000 | not available |
Applications
- Automotive electronics
- Signal conditioning and sensing amplification
- Portable instrumentation
- Test and measurement
- Medical monitors and diagnostics
- Remote meters
- Audio equipment
- Security systems
- Communications
- Pagers
- Cellular telephone
- LAN
- 5 V Datacom bus
- Error amplifier in motor drives
- Transducer buffer amplifier
Disclaimer
The information published on product information pages of the www.nxp.com or www.semiconductors.com websites is an extract from product data sheets and is for information purposes only. For detailed information please check the most recent version of the relevant product data sheet as published on these websites. In the event of any conflict between product information pages and data sheets or deviations from information provided in the product data sheets on these product information pages, the information provided in the product data sheets shall prevail.
The product status of the product(s) described in the product data sheet may have changed since publication of the data sheet and therefore information in datasheets on product status may be outdated. The latest information on product status is published on the product information pages of the above-mentioned websites.
As from October 1st, 2006 Philips Semiconductors has a new trade name - NXP Semiconductors, which will be used in future data sheets together with new contact details. In data sheets where the previous Philips references remain, please use the new links as shown below.
- http://www.philips.semiconductors.com use http://www.nxp.com
- http://www.semiconductors.philips.com use http://www.nxp.com (Internet)
- sales.addresses@www.semiconductors.philips.com use salesaddresses@nxp.com (e-mail)
The copyright notice at the bottom of each page (or elsewhere in the document, depending on the version)
- © Koninklijke Philips Electronics N.V. (year). All rights reserved -
is replaced with:
- © NXP B.V. (year). All rights reserved.-
If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or phone (details via salesaddresses@nxp.com). Thank you for your cooperation and understanding.